Power to Choose

The use of shorter programs at the washing machine, dryer or dishwasher and at lower degrees also save on electricity as 85 percent of electricity consumed goes to heat. For those who use the boiler, it is important to keep in mind the hours of the night tariff. Cost reduction can be achieved by leaving the thermostat at 60-65 degrees and draining the tank every three months, experts say.

When purchasing new electrical appliances, pay attention to energy labels and standby power consumption. Investing in Class A appliances is well worth it in the long run, though they are a little more expensive as they will consume less power over the years. You can have the Power to Choose there now.

Power to Choose

Buying a power socket with many sockets and a power switch is also a good investment. Thus with the push of a button, many appliances can be switched off, including those that consume a lot of current in standby mode.

How to Reduce Bills for Heating

Good thermal insulation of a home can lead to significant savings from bills, as old windows and leaking heat through it can load the bill by 10-25 percent, studies show. The effect of such a measure would also be felt in the summer when the dwellings cool down. A popular and effective measure is the insulation of the wall behind the radiator with foil. There should be no furniture, tight curtains in front of the radiators, and radiator grilles are not desirable as they are an obstacle to the access of heat to the room. They close the space around the heating element and the thermo-valve closes when it is heated. Thus, some of the heat goes to the wall and out, and, according to experts, this leads to an increase in heat consumption by 10-20 percent.

Maintaining the same temperature throughout the home is not economical, according to Sofia District Heating. With the inclusion of only one radiator and wide-open doors, other rooms will not warm-up and the bill will not fall, according to the company some of the most popular misconceptions. The constantly running radiator will consume large amounts of energy to maintain the temperature set through the thermostatic valve in a wide area.

If everyone leaves home in the morning, it is not good to completely close the radiator valves. In the evening, much more energy will be needed to warm the cooled rooms. It is best to leave the valves in the first or second stage.

When it is necessary to be away from the dwelling for a long time, it is good to leave the valves in the asterisk division. This will keep the room at a minimum temperature 6-7 degrees Celsius and even if it’s cold outside, the radiators will not freeze and become an accident.

When ventilating, the valve should be left on an asterisk and the windows should be wide open for five minutes, advised by the district heating company. The thermostatic valve should not be left under the direct action of cold air for a long time, because then it opens automatically to the maximum extent and the energy consumption of the radiator is very high. The apartment should not be heated. European experts estimate that reducing the temperature of a home by one degree equals about 6 percent of energy savings.

Written by